-----------------------------------------------------------------
Important Note for IK 120 with Board ID Number 298 538 01
-----------------------------------------------------------------

Hardware Change!

The IK 120 can generate an interrupt via the external latch 
signal input L1.X1 and L1.X2. The IK 120 with ID number 268 136 01
repeated the interrupt as long as the external contact was closed. 
With the new hardware ID number 298 538 01 the IK 120 generates 
only one interrupt regardless of the closing time.


-----------------------------------------------------------------
New Programming Examples
-----------------------------------------------------------------

The programming examples on directories <TP> and <C600> are 
documented in the manual. In the directory <MORE_TP> 
are additional examples with the following features:

-INSTALL.EXE helps to commission your IK 120. It shows an overview
 of the vacant addresses and displays how to set the DIP switch.

-IK120.EXE displays the position values of both axes and offers 
 many additional features. This example is dialog driven. You
 can use either the mouse or the keyboard. For additional 
 explanations of the menu options, press F1.

-SAMPLE1.EXE, SAMPLE2.EXE and SAMPLE3.EXE are simple 
 application programs showing the various latch commands.
 
-SAMPLE4.EXE shows the basic features of a counter program.
